What to say when a customer says your quote is too expensive
Respond calmly, find out what the customer is comparing and revise the work before revising the price.

Before you start
- Ask whether the issue is budget, different scope or unclear inclusions.
- Compare the work and product specification without criticising another contractor.
- Show what changes in a revised quote, rather than sending only a lower total.
A reply you can send when a customer says your quote is too expensive
Reply quickly, stay friendly, and ask a question before you touch the price. Here's wording you can adapt:
Hi [Name], thanks for letting me know, and for considering us for [job name]. I'd like to make sure the quote fits what you're after. Could you tell me what budget or range you had in mind, and which parts of the quote surprised you most? If it helps, I'm happy to go through it line by line, including [item you want to walk through], so you can see exactly what's covered.
The reply does three useful things. It keeps the conversation open without sounding defensive. It asks instead of guessing, because at this point you don't know what "too expensive" means. And it offers a walk-through, which is useful whether the problem is budget or misunderstanding.
Don't offer a lower number in this first reply. If you cut the price before you know the reason, you may give away margin to solve a problem that was really a misunderstanding. Use the wording that sounds natural to you.
Work out what "too expensive" actually means
Usually it's one of three things:
- A tight budget. The job costs more than they planned to spend.
- A different scope. They're comparing your quote with another one that covers different work or materials.
- Unclear inclusions. They don't see what's inside your price, so the total looks high.
Three plain questions help you sort these out. What number or range did you have in mind? What were you comparing the quote to? Which parts surprised you?
A budget answer usually leads to changing the job, which is covered below. If they're comparing quotes, ask what the other one covers: the products, the prep, the removal, the finish. Don't guess at its quality, and don't suggest it's wrong. A lower price may simply reflect different work, or a different way of running a job, and you can't see inside it. If the customer isn't sure what's included, the fix is a clearer explanation.
If they keep coming back to one line, such as removal or access, ask what concerns them about that part.
Check your quote against what the customer thinks they're getting
Quotes for the same job tend to differ in a few places, so check these first:
- Specification and product grade. Are the products named, or does the quote just say "supply and fit"?
- Preparation. Is prep a visible line, or buried inside a bigger figure?
- Removal and disposal. Is taking out the old material included? Is hauling it away?
- Access. Does the site need extra equipment, extra carrying or longer working time?
- Finish. What level of finish are you pricing, and does the customer expect the same?
Now read your quote the way your customer would. A single lump sum tells them very little. If a line says only "labour and materials," they have nothing to compare against what they're picturing.
Explain the difference by describing what your price covers, and let the customer do the comparing. Something like "My price includes removing and disposing of the old [material] and preparing the surface to [standard]" is enough. You don't need to say anything about anyone else's quote.
Construction Job Estimator can help here. It shows the quantities, pack sizes, prices and labour behind each figure, so you can see what each part of the price covers and explain it with confidence.
Recalculate genuine options before offering a discount
If the budget really is tight, change the job so the new price reflects the new work. A bare discount takes money out of your profit while the work stays the same. If you decide to do it, make that a deliberate choice and check what it does to your margin first.
These are the levers that usually change the price honestly:
- Reduce the area or scope.
- Phase the work over time.
- Choose a different product or finish.
- Change what the customer supplies or does themselves.
- Adjust the timing.
Check which costs each change actually affects. Phasing may spread the customer's spending but add return visits, and a later date does not automatically make the work cheaper. Work the new figures through the whole quote. Markup deserves a mention: it's a deliberate part of your price, so lower it only if you've decided to, not by accident while trimming other numbers.
Safety and compliance work stays in. You can say it plainly: "That item is part of doing the job properly, so it stays in the quote whichever option you choose." Don't offer it as something to drop, and don't make it sound optional.
This is where Construction Job Estimator saves effort. You can change quantities, products, labour time and rates, markup and individual line items, then prepare a clear revised estimate or quote to send. It has a seven-day free trial if you want to try it on a quote you're reworking.
Send a revised quote that shows what changed
Don't send only a lower total. Keep the original scope visible, so the customer can see what was removed, swapped or kept. An explanation helps the customer see why the price has changed.
Label each change in plain words: "Switched to [product], which reduces the price by [amount]" or "Phase 2 area moved to a later date." If safety or compliance items remain, list them once without a lecture.
Keep the covering message short. Summarise the options, say what happens next, and give a reasonable date to decide. Skip pressure phrases like "price won't last." A customer who can see what changed can decide for themselves.
If none of the alternatives fits their budget, say so politely. It is better to leave them with a clear scope and price than agree to work you cannot deliver at that figure.

