How to bid a siding job
Build a siding bid that covers more than panels. Work through wall measurements, carton quantities, removal, labor and overhead with a clear example.

Before you start
- Separate the wall area from the quantity of siding you need to order.
- Price removal, preparation, installation and cleanup as distinct labor tasks.
- Build your customer price from complete costs, then state the scope and exclusions.
To bid a siding job, agree the scope first. Then measure wall and gable areas, turn them into full purchased cartons plus trim, budget labor by task, add access, delivery and disposal, and add overhead. Last, add profit and write your exclusions. Keep two numbers separate: what the job costs you and the price you send. The example below ends at $4,112.50 before applicable tax.
The example uses hypothetical costs in USD, with sample labor hours and allowances for one vinyl elevation. Replace them with your own job costs and supplier prices.
Start with the scope, including what you're not pricing
Write the scope before you touch a calculator. For the example: replace horizontal vinyl on one elevation, remove the existing vinyl, install the specified water-resistive barrier (WRB) and flashing, install trim and panels, and clean up.
Then write what the price assumes. Here, the sheathing is sound and usable. Hidden rot, structural repairs, insulation, soffit and fascia, window replacement and the other elevations are not in the price. If you find substrate problems once the old siding is off, you assess them, price them and get approval as separate work. Make that process clear before you agree the price.
Check the site before you price access. The lift, scaffold or ladder setup depends on the wall, the ground and the drop zone, so price it for the actual site.
Measure each wall and gable
Break the elevation into simple shapes. The example wall is a rectangle, 40 ft wide by 10 ft high, which is 400 sq ft. The gable is a triangle, 40 ft base by 5 ft rise, divided by 2, which is 100 sq ft. Gross area is 500 sq ft.
There are three ordinary windows at 4 ft by 5 ft, or 60 sq ft total. Take those out and you get a net clad area of 440 sq ft. That's the wall you'll actually cover. The purchasing area is a different number: what you order, including cuts and waste.
For vinyl, don't deduct every window and then order 440. The 2020 Vinyl Siding Institute installation manual (pp. 10–11) measures rectangles and gables this way. It generally leaves ordinary doors and windows in the order area, since the cutting around them creates waste. It also notes that unusually large openings may justify a partial deduction. The manufacturer's and project's requirements come first.
That's vinyl guidance, not a rule for every cladding. Fiber-cement and wood differ in product quantities, handling, cutting and labor, so bring inputs for the product you're bidding. Trim, starter, corners and opening channels are measured separately by length. They don't come out of wall area.
Turn area into full cartons and price the materials
Start from the 500 sq ft gross area. This example applies a 10% cutting allowance, which gives 550 sq ft. That's the example's chosen allowance, not a standard. Confirm it against your profile and your planned cuts.
Next, find the coverage per carton. The supplier record for CertainTeed MainStreet Double4 lists 24 panels per carton, 12 ft 6 in long, with 8 in exposure. That's 24 × 12.5 × (8 ÷ 12) = 200 sq ft per carton.
550 ÷ 200 = 2.75, so you buy 3 full cartons. That's 600 sq ft of siding purchased, not 600 sq ft of wall. This example assumes the supplier sells full cartons; check how your chosen product is sold.
| Material | Qty × price (USD) | Cost (USD) |
|---|---|---|
| Siding panels | 3 cartons × $210 | $630 |
| Trim, starter, corners, opening channels | Measured allowance | $240 |
| WRB, tape and flashing | Allowance | $220 |
| Fasteners and consumables | Allowance | $80 |
| Materials total | $1,170 |
If you want help building the material list and pricing the job, you can use Construction Job Estimator. Describe the work by voice or text, add your measurements and site photos, and the app puts together a working estimate. It finds real-time material prices from local suppliers and brings your materials, labor and other costs together. You can review the quantities and pack sizes, adjust the figures or enter a price you already have, then prepare a professional estimate to send your customer.
To check the carton quantity with our siding calculator, use 500 sq ft, no opening deduction, 10% allowance and 200 sq ft per carton for this example.
Budget labor by task in person-hours
Price labor in person-hours: the hours worked by each person, added together. Two people working 20 hours each is 40 person-hours. Count every person's working time, including your own.
| Task | Person-hours |
|---|---|
| Measure, plan, collect materials, travel | 4 |
| Removal | 8 |
| Wall prep, WRB and flashing | 8 |
| Trim and panels | 16 |
| Cleanup | 4 |
| Total | 40 |
The sample loaded labor cost is $35 per person-hour, so 40 × $35 = $1,400. In this example, that figure covers wages and employment costs only, not overhead or profit.
Your job records should set the hours, not a generic speed figure. And if the rate you bill already includes overhead and profit, don't add them a second time below.
Removal, cleanup and collection time are already in these hours. Dump or tipping fees aren't, so they go in the next step as their own line.
Add job costs, overhead and profit
Other job costs are the access equipment, the haul and tipping fees, and the delivery fee. Keeping disposal fees apart from removal labor shows you which part of the bill is time and which is a charge from someone else.
| Item | Cost (USD) |
|---|---|
| Materials | $1,170.00 |
| Labor (40 person-hours × $35) | $1,400.00 |
| Access equipment | $180.00 |
| Haul and tipping fees | $160.00 |
| Delivery fee | $80.00 |
| Direct cost | $2,990.00 |
| Allocated business overhead | $300.00 |
| Cost including overhead | $3,290.00 |
| Markup at 25% of $3,290 | $822.50 |
| Bid before applicable tax | $4,112.50 |
The $300 overhead is a share of your business costs assigned to this job. It leaves out the labor, access, delivery and disposal already listed, so nothing is counted twice.
The 25% markup is a sample choice, not a recommended standard. It's also not a 25% margin. Here the $822.50 is 20% of the $4,112.50 price. If you want to work from a target margin instead, the contractor markup calculator converts between the two.
That gives you a price of $4,112.50 against $3,290 in job costs including overhead, before applicable tax.
Put the scope, price and exclusions in the customer's document
Your customer should see the scope and the limits in the same document as the price. A paragraph for this example could read:
Replace horizontal vinyl siding on the front elevation, including removal of existing vinyl, specified WRB and flashing, trim and panels, and cleanup, for $4,112.50 before applicable tax. Price assumes sound, usable sheathing. Hidden rot or structural repair, insulation, soffit and fascia, window replacement and other elevations are not included. Any substrate work found after removal will be assessed and priced separately for your approval. Access equipment is priced for the site as inspected.
Before you send it, add the chosen product and color, payment terms and how long the quote stays valid. For a ready layout, use the blank siding estimate template. Its sample uses different numbers from this example.

