How to price interior demolition work

Build your strip-out price from the work involved, including protection, removal, waste handling and cleanup. Follow a sample bid and debris-volume calculation.

3D contractor reviewing a kitchen strip-out on his phone beside existing cabinets and rolled floor protection

Before you start

  • Price protection, removal, carrying and cleanup as part of the complete job.
  • Separate solid material volume from loose debris and confirm waste terms with your hauler.
  • Add overhead and chosen profit to confirmed job costs, then state exactly what your quote includes.

To price interior demolition work, add your direct job costs, your allocated overhead and the profit you choose. The total is the price you send your customer. This guide covers kitchen and room strip-outs, not whole-building teardown. It shows how to pin down the scope, build a sample price and estimate debris volume for your waste costs.

I'll use markup to mean a percentage added on top of your total cost. Margin is different: it's profit as a share of the price. Keeping the two apart matters when you check your numbers.

Define the scope before you price a single hour

A strip-out price falls apart when the scope is loose. Write these points down before you cost anything:

  • Finish point: what comes out, what stays, and what condition you leave the room in.
  • Retained or salvaged items: anything the owner keeps or you plan to reuse.
  • Protection: the route through the house and any surfaces that stay.
  • Sorting, carry and loading: how far material travels, and whether it's a ground-floor carry or involves stairs.
  • Site restrictions: working hours, noise limits or occupants at home.
  • Cleanup standard: broom-clean, vacuumed, or retained surfaces wiped down.
  • Services and reports: who handles service isolation and who orders any survey or report.

Each of these changes the person-hours or the other costs. A long carry or a protected route adds crew time that the actual tear-out never shows. Price removal, protection, sorting, carrying, loading and cleanup, not just the time spent pulling things apart. Keep removal labor separate from disposal fees, so you don't count loading twice or leave the haul out.

Some conditions can't be priced by guessing. Arrange the relevant pre-work assessment of structural condition, hazardous materials and services. Where specialist work is needed, confirm its scope and cost before giving a firm price. Writing an exclusion into your quote doesn't waive safe planning. OSHA's demolition page frames pre-work planning around structural condition, utilities and hazardous materials, which can change both your scope and your costs.

To turn the scope itself into customer-ready wording, see how to write a construction scope of work.

Once you have your walkthrough notes, measurements and photos, you don't have to retype them into estimate lines. You can describe the strip-out to Construction Job Estimator by voice or text, include the measurements you've taken, add site photos, and get a working estimate. Then check its breakdown against your assessed scope and your own hauler and specialist quotes.

Sample kitchen strip-out: build the price line by line

The prices, hours and rates below are hypothetical USD figures, not market averages or production targets. Replace them with your own job costs and time allowances. Applicable customer tax is excluded, and the cost lines include any purchase tax you can't recover.

Scope item Sample job
Room 12 x 10 ft kitchen
Base cabinets 12 linear ft
Wall cabinets 10 linear ft
Countertop 12 ft laminate
Floor 120 sq ft specified finish removed
Retained Walls, ceiling, subfloor
Appliances Removed by owner before start
Services Qualified subcontractor handles agreed isolation
Access Ground floor, short carry, protected route
Before final bid Qualified pre-work review confirms scope
Excluded Structural removal, hazardous-material remediation, repair of hidden damage
Final condition Removed items out, waste collected, retained surfaces cleaned; no new-floor prep

Labor

Task Person-hours
Planning and coordination 2
Protection and setup 6
Cabinets and countertop removal 8
Specified floor finish removal 12
Sorting, carrying and loading 8
Cleanup 4
Total 40

That's 40 person-hours in total, not 40 hours per worker. At a loaded labor cost rate of $35 an hour, labor is $1,400. This is what an hour costs you, before business overhead and profit. It isn't the rate you bill.

Other costs

Item USD
Service-isolation subcontract (agreed) $450
Pre-work assessment budget $350
Waste delivery, collection and disposal, agreed load $550
Equipment and dust-control hire $160
Protection and consumables $110
Permit fee allowance, if applicable $80
Total $1,700

The $350 assessment and $80 permit are placeholders. Replace them with the real scope and your local fees before a firm quote. They aren't a claim that every job needs them or that these amounts cover them. Your crew's loading time is already in the labor, so the waste line covers only delivery, collection and disposal.

From cost to price

Step USD
Labor $1,400
Other costs $1,700
Direct job costs $3,100
Allocated overhead $400
Total cost $3,500
Markup at 25% $875
Price before tax $4,375

The 25% is a chosen example, not an industry norm. With overhead already covered in the cost base, choose a markup that gives the job the profit you need. Notice the difference between markup and margin here: $875 of profit on a $4,375 price is a 20% margin. To check your own figures, try the contractor markup calculator.

Before you send any price, check that overhead appears once, labor appears once, and loading isn't in both the labor and the waste fee.

How to estimate the volume of demolition debris

Start with an inventory. List each material stream: flooring, countertop, cabinets, anything else. Mark what's retained or salvaged and keep it out of the disposal count. Then add up each stream once so nothing overlaps. The EPA's page on construction and demolition materials notes that this waste includes bulky, heavy and potentially reusable or recyclable materials. That's a good reason to separate salvage from disposal, and not to count on a salvage credit in your price.

For installed flat layers, measure the thickness, then use this:

area (sq ft) x thickness (in) / 12 = cubic feet, and cubic feet / 27 = cubic yards

For a floor with a measured half-inch layer to remove: 120 sq ft x 0.5 in / 12 = 5 cu ft, or 0.185 cu yd. That is solid material only. It's not a container size.

Solid volume understates what you haul. Broken pieces leave voids, and how much they swell depends on the material and the job. Don't borrow a universal multiplier. Use your own measured loads from past jobs, or ask your hauler. Cabinets need separate treatment too. Estimate them from how you'll actually stack or break them down, not from the full installed cabinet envelope.

For material that's already loose, or a pile you plan to build, the geometry is simpler. Take a hypothetical pile of 6 ft x 4 ft x 3 ft: 72 cu ft, and 72 / 27 = 2.67 cu yd. That only demonstrates the arithmetic. It isn't a claim that the kitchen makes that much waste. For an uneven pile, use the average depth or split it into sections and add them.

Volume also doesn't tell you weight. Ask your hauler what material they accept, how much weight is included, where the fill limit is and what overages cost. WM's dumpster rental page notes that container sizes and availability depend on location and that different materials suit different containers. Confirm the right container with your local hauler.

The $550 waste line in the sample is a hypothetical quote for an agreed load. It isn't calculated from these formulas. Use your volume work to brief the hauler and sanity-check what comes back.

Turn your scope and costs into a customer-ready quote

Your customer needs to see more than a total. State exactly what's removed and what stays, the finish point, your access assumptions, the price, how tax is treated, validity and payment terms, and your exclusions. Add how you'll handle a change if something unexpected turns up behind a wall or under a floor.

You can bring those details together in Construction Job Estimator. Labor time, rates, materials and other job costs such as equipment hire and disposal sit in one estimate. You can see the quantities and labor behind each figure and edit any line, including markup. You enter your own subcontract and hauler quotes, so the waste and service lines carry the numbers you've actually been given. Where materials are involved, like protection materials, you get real-time prices from local suppliers, or you can enter a price you already have. When the figures are right, you prepare a professional estimate or quote to send. It runs on iOS and Android, so you can build it on site from your notes.

For more on how the app handles this kind of work, see the demolition estimating app page. And if the strip-out is the first phase of a larger remodel, how to bid remodeling jobs covers the wider price.

← Back to all guides

Construction Job Estimator

Your next estimate.
Ready in minutes.

Tell us what needs doing. Get real-time material prices from local suppliers, bring your labour and other costs together, and send your customer a professional estimate.

Take the next job from description to estimate.

★★★★★ Used by 10k+ contractors