Free metal roof material calculator

Count the panels, then price the order.

Enter the measured slope length and eave width for matching rectangular roof planes.

Free to use · No signup · By Daniel

Start with the job details.

Use your own figures or try the example.

Your entries stay in this page. Refreshing clears them.

Your calculation.

Calculated from the figures you enter.

A clear starting point
for the job ahead.

Fill in your measurements or costs to see the result and its breakdown here.

Construction Job Estimator app

Ready for the whole job?

Turn panels, trim and labour into one roofing estimate.

Keep the scope, materials and labour together in Construction Job Estimator.

Create an estimate in the app

Know what goes into the number.

How the calculation works

Round each plane’s eave width up to whole installed panel widths, multiply by the number of identical planes, then price the ordered panel and trim lengths.

1

Measure the work.

Side laps reduce coverage compared with the overall sheet width.

2

Apply the calculation.

Round each plane’s eave width up to whole installed panel widths, multiply by the number of identical planes, then price the ordered panel and trim lengths.

3

Review the result.

Assumes one full-length panel from eave to ridge. Does not design end laps, penetrations, fasteners or wind resistance. Different planes need separate calculations.

Worked example

See the calculation
come together.

Two 24 ft wide planes with 3 ft effective panels need 16 panels. At 16 ft per panel, that is 256 linear ft of panel stock.

Illustrative inputs. Replace them with the figures for your job.

The example breakdown

Full-length panels before spares
16 panels
Total ordered panel length
256 ft
Panels
1,280 USD
Panels, trim and fixings
1,680 USD

Check the details before you quote.

Use effective width.

Side laps reduce coverage compared with the overall sheet width.

Use slope length.

A horizontal run is shorter than the panel length up a pitched roof.

Confirm fabrication.

Check supplier length limits, trim profiles and the panel installation system.

What the result covers

Assumes one full-length panel from eave to ridge. Does not design end laps, penetrations, fasteners or wind resistance. Different planes need separate calculations.

Common questions

Are the example costs current market prices?

No. The worked example uses illustrative inputs. Enter current supplier quotes and your own labour and business costs.

Can I use this in the USA, Canada or the UK?

Use the measurement units shown beside each field and keep all prices in one currency. Currency selection labels amounts; it does not convert them.

What is outside this calculation?

Assumes one full-length panel from eave to ridge. Does not design end laps, penetrations, fasteners or wind resistance. Different planes need separate calculations.

Can I save the calculation?

Yes. Once your inputs are complete, download a CSV or use Print / save PDF. Your copy includes the inputs and calculation limits. Refreshing this page clears your entries.