Measure the surface.
For a rectangular room, add length and width, double it, then multiply by wall height. Subtract doors, windows and anything you won’t paint.
Wall area = 2 × (length + width) × height
Free paint calculator
Measure your room. Choose your coats. Get a clear paint quantity and a shopping list.
Free to use · No signup · By Daniel
Start with the surfaces you’re painting.
From wall measurements to cans.
Enter your room dimensions or surface area to see your paint quantity here.
Paint is one part of the job.
Bring preparation, materials and labour together in Construction Job Estimator.
Create an estimate in the appMeasure once. Check before you buy.
Calculate one colour and coating system at a time. Run a separate calculation for different paints, primer or trim.
For a rectangular room, add length and width, double it, then multiply by wall height. Subtract doors, windows and anything you won’t paint.
Wall area = 2 × (length + width) × height
Multiply the net area by the number of coats, then divide by the paint’s stated coverage per gallon or litre. Different surfaces and application methods affect coverage.
Paint needed = area × coats ÷ coverage
Add your chosen extra allowance, then divide by the can size and round up. The calculator uses one can size; a mix of sizes may leave less paint over.
Cans to buy = round up (paint ÷ can size)
Worked example
This example uses a 12 × 10 ft room with 8 ft walls, 32 sq ft of openings and no ceiling. These are sample measurements, not your result.
At 350 sq ft per US gallon per coat, two coats need about 1.83 US gallons. With no extra allowance and 1-gallon cans, buy 2 cans.
The numbers behind the result
Round up the full calculation, not a rounded display value.
A 120 sq ft room can have much more than 120 sq ft of wall. Measure the walls, or use room dimensions above. For angled or irregular walls, add the measured areas yourself.
Ceilings, walls, doors and trim may need different products and coat counts. Include the ceiling only when it uses the same paint and coverage assumptions.
Primer, textured surfaces and a big colour change can alter what you need. Follow the product instructions and assess the surface before ordering.
Coverage guidance: Sherwin-Williams describes typical coverage of about 350–400 sq ft per gallon, with variation by surface and application. Dulux recommends using the coverage stated on the tin or product information. Always replace the starting value with your selected paint’s figure.
It calculates quantities and whole cans, not a local price. Multiply the cans by your supplier’s price to budget for paint. For a customer estimate, also allow for preparation, application time, protection, equipment and the rest of your scope.
Yes. Choose litres independently of feet or metres. US gallons here means US liquid gallons, not Imperial gallons. Switching units converts your entered values; check the converted can size against the sizes your supplier sells.
Use “I know the area” and add the surfaces that share the same paint and coat count. Enter their combined openings once. Calculate rooms separately when their paint, coverage or number of coats differs.
No. This is one paint or coating calculation. Run another calculation for primer using its own coverage and required coats. Do the same for trim or a separate ceiling paint.
There is no single allowance for every job. The calculator starts at zero extra. Enter an allowance appropriate to your surface, application method and touch-up needs. Whole-can rounding may already leave some paint over.
Yes. Once the inputs are complete, download a CSV or use Print / save PDF. Your copy includes the measurements and assumptions, so you can check how the quantity was calculated. The page does not save your entries after a refresh.