Measure the work.
The house floor area can be smaller than the horizontal roof footprint.
Free roofing squares and bundles calculator
Apply the roof pitch to a horizontal roof footprint, add waste and use your shingle’s bundle coverage.
Free to use · No signup · By Daniel
Use your own figures or try the example.
Calculated from the figures you enter.
Fill in your measurements or costs to see the result and its breakdown here.
Ready for the whole job?
Keep the scope, materials and labour together in Construction Job Estimator.
Create an estimate in the appKnow what goes into the number.
Multiply the horizontal footprint by √(1 + (pitch/12)²). Add waste, then divide by bundle coverage and round up. One roofing square is 100 sq ft.
The house floor area can be smaller than the horizontal roof footprint.
Multiply the horizontal footprint by √(1 + (pitch/12)²). Add waste, then divide by bundle coverage and round up. One roofing square is 100 sq ft.
One uniform pitch. Do not apply the multiplier to an already measured sloped roof area. Starter, ridge, flashing, underlayment and labour are separate.
Worked example
A 1,000 sq ft footprint at 6:12 becomes about 1,118.034 sq ft of roof. With 10% waste and 33⅓ sq ft per bundle, allow 37 bundles.
Illustrative inputs. Replace them with the figures for your job.
The example breakdown
The house floor area can be smaller than the horizontal roof footprint.
Bundles per square vary by shingle. Use the selected product.
Hips, valleys, dormers and returns can change the waste allowance.
One uniform pitch. Do not apply the multiplier to an already measured sloped roof area. Starter, ridge, flashing, underlayment and labour are separate.
Product information to check: GAF: roof area and roofing squares.
First decide which number you're holding: the horizontal footprint, including overhangs, or a measured sloped surface. For a footprint, multiply by the square root of 1 plus (rise ÷ 12) squared. At 6:12 that factor is about 1.118. If you measured the sloped surface itself, it's already roof area, so don't apply pitch again. The roofing calculator takes the horizontal footprint including overhangs and one pitch, then applies that factor once. House floor area can be smaller than the roof footprint. Roof planes with different pitches need separate calculations.
It depends on what the 2,000 sq ft represents. Coverage varies by product, so read the wrapper on the shingle you're using. For illustration only, this example uses exactly 33⅓ sq ft per bundle (100 sq ft across three bundles). If 2,000 sq ft is already sloped surface, it needs 60 bundles with no allowance. An illustrative 10% allowance gives 2,200 sq ft and 66 bundles. That 10% is only an example, not a rule for every roof. If 2,000 sq ft is the horizontal footprint at 6:12, the sloped surface is about 2,236.07 sq ft. With the same 10% allowance it's about 2,459.67 sq ft, which rounds up to 74 bundles. Count starter, ridge and accessories separately from the field shingle bundles.
No. The worked example uses illustrative inputs. Enter current supplier quotes and your own labour and business costs.
Use the measurement units shown beside each field and keep all prices in one currency. Currency selection labels amounts; it does not convert them.
One uniform pitch. Do not apply the multiplier to an already measured sloped roof area. Starter, ridge, flashing, underlayment and labour are separate.
Yes. Once your inputs are complete, download a CSV or use Print / save PDF. Your copy includes the inputs and calculation limits. Refreshing this page clears your entries.