Measure each surface.
Add wall and ceiling areas that use the same board and number of layers. Use surface area, not the floor area of the room.
Free plasterboard calculator
Start with your wall and ceiling area. Check board sizes, add your allowance and get a clear sheet count.
Free to use · No signup · By Daniel
Use your own figures or try the example.
Calculated from the figures you enter.
Fill in your measurements or costs to see the result and its breakdown here.
Ready for the whole job?
Keep the scope, materials and labour together in Construction Job Estimator.
Create an estimate in the appKnow what goes into the number.
Enter metres for board dimensions when metric is selected. A board entered as 2.4 × 1.2 has an area of 2.88 m². The tool divides adjusted surface area by this board area and rounds up to a whole board.
Add wall and ceiling areas that use the same board and number of layers. Use surface area, not the floor area of the room.
Enter the length and width of the board you will actually buy. Check openings, layers and your chosen allowance for cuts or damage.
Divide the adjusted surface area by one board’s area. The result rounds up; review the layout before placing your order.
Worked example
A measured 60 m² area less 6 m² of openings leaves 54 m². One layer with 10% waste gives 59.4 m². At 2.88 m² per board, 20.625 boards round up to 21. Use separate runs when different areas need different board specifications.
Illustrative inputs. Replace them with the figures for your job.
The example breakdown
A door or window may leave offcuts you cannot reuse. Deduct only areas that will actually reduce your board requirement.
Calculate different board types, thicknesses or layer counts separately. Keep the results with the scope they belong to.
Jointing materials, fixings, framing, insulation, access and labour are separate items. A sheet quantity is the start of an estimate.
Board type, thickness, fixing method and system performance are not selected by this calculator. Follow the specified assembly and manufacturer information. Review cutting losses, handling damage, joint positions and whether opening deductions will really reduce the number of whole boards needed.
Product information to check: British Gypsum plasterboard products.
No. It calculates whole boards from area. Add fixings, jointing products and other materials separately using your selected system’s requirements.
Yes. Add their measured areas when they use the same board and layers. Run separate calculations when the board specification differs.
Only if the deductions reflect your intended cutting layout. Small openings do not always reduce the number of whole sheets you need.
No. Choose the board and assembly from the project specification and relevant manufacturer information. This calculator only checks quantity.
Yes. Once your inputs are complete, download a CSV or use Print / save PDF. Your copy includes the inputs and calculation limits. Refreshing this page clears your entries.