Construction estimate example: what to send your customer

See what to include in your next estimate, with a sample fence job, a clear price breakdown and wording you can adapt.

3D contractor reviewing a paper estimate and phone at a workbench beside a timber privacy fence

Before you start

  • Tell your customer what you’ll do, what it costs and what is left out.
  • Use your own job costs to set the price you send.
  • Check the scope, dates, payment details and tax before you send it.

Your customer needs to know what you’ll do, what’s included and what they’ll pay. A good estimate makes those answers easy to find.

Below is a construction estimate example for replacing an 80-foot fence. Use the layout for your next job, then change the scope and prices to match your work.

Sample estimate: privacy fence replacement

Daniel & Sons
Estimate EST-001
Privacy fence replacement

Project: remove the existing fence and replace it with a straight 80-foot, 6-foot-high privacy fence. No gate.

Item Amount (USD)
Materials $1,248.77
Site preparation and removal $897.00
Fence installation $1,794.00
Cleanup $299.00
Delivery and disposal $378.35
Total before applicable tax $4,617.12

These are sample prices in USD; use your own costs for your job.

Here's the scope paragraph that goes under the table. You can copy it and edit it to match your job:

This price covers removal of the existing fence and replacement with a new 6-foot-high privacy fence along a straight 80-foot run, with no gate. It includes replacement panels and posts, installation, cleanup, delivery of materials, and disposal of the old fence. It assumes accessible, level ground. It does not include gates, staining, rock excavation, major ground repairs or permit fees. Applicable tax is shown separately.

What makes this estimate clear

The scope sits right beside the price. Your customer can see what the $4,617.12 buys and what it doesn't. A gate or staining can change the price, so agree those details before you start. The ground matters too: this price assumes you can reach the fence easily and the site is level.

Removal and disposal are separate lines for a reason. "Site preparation and removal" is the labour to clear the area and take the old fence down. "Delivery and disposal" covers getting the new materials to the site and the offsite fees for the old fence. That short explanation helps your customer see why both costs are there.

Your job costs help you set the price. In this example, the costs were $4,014.89: $1,085.89 for materials, $2,600 for labour and $329 for delivery and disposal. The labour figure is 40 hours of work, added up across everyone on the job, at a sample cost of $65 per hour. That's not a promise of how many days you'll be on site.

The sample then adds a 15% markup, which is the amount you add on top of your job costs. That's $602.23, giving $4,617.12. Each line in the table already includes that markup, so don’t add it again.

Choose a markup that works for your business; 15% is just the figure used here. The amount you add may still need to pay for overhead, such as running your van or office. Check what your job costs already include before counting any of those expenses again. What you add isn’t all profit if some costs are still unpaid. If you want to check what a markup does to your own numbers, use the contractor markup calculator.

How to create a construction estimate from scratch

Start with scope, not prices. Measure the job yourself and write down what it includes. For the fence, that means the length of the run, the height and whether there's a gate.

Then cost it with real numbers. Use the materials you'd actually buy, the person-hours added up across everyone on the job, and other costs such as delivery, equipment hire and disposal. Account for overhead, then set a price that also provides your chosen profit. If your markup is meant to cover both overhead and profit, check that it recovers both. Do not add overhead again if your rates already include it.

Your customer doesn't need to see all of that working. They need the scope, the selling prices, the date you issued the estimate and your terms. Use the sample above for the price breakdown and the checklist below for the remaining document details. If the scope wording is the hard part, read how to write a construction scope of work. The same steps work whether you call the document a contractor estimate or a quote.

What to add before you send it

The sample focuses on scope and price. A real estimate also needs:

  • Your customer's name and the job site address
  • The date you're issuing it and how long the price holds
  • The agreed materials and finish, such as panel style and whether staining is included
  • When you expect to do the work
  • Payment arrangements
  • How tax applies, stated clearly on the estimate

Agree who will obtain any required permits; the sample excludes the fees, not the need for approval. Check the tax treatment yourself and write it out so your customer isn't guessing. If you're in Canada, follow the same structure but build the whole estimate from your own CAD prices. Don't relabel these USD figures.

Check your measurements before you use the sample layout. The fence estimating guide explains how to count panels and posts, then work out the labour.

Which exclusions should you write?

List only what you're actually leaving out. A pasted-in standard list makes the document longer and hides the items that matter on this job.

Think about hidden repairs, finishes next to the work, other trades, access and disposal, but write each one only if it's truly excluded. The fence sample leaves out gates, staining and rock excavation because those are the things that could change that price. Be exact with permits. State whether permit fees are included and agree who will obtain any required approvals. An exclusion does not remove a requirement for approval.

Put each exclusion in plain words next to the price, where your customer will see it.

If your customer asks for a gate later

Don't squeeze a gate into the existing price. Check the opening width, gate type and hardware, and confirm where it will go and how you'll reach it to install it. Price the gate work as its own line, and update the estimate once the customer has seen that number. The original scope paragraph already says no gate, so the change is easy to point to.

Estimate or quote: what do the words mean?

A quote is a proposed price for specified work. An estimate is a forecast that depends on stated assumptions. People use the two words loosely, so don't count on the label to do the work for you.

Say on the page what the price covers and what it assumes. The sample does this when it assumes accessible, level ground. If the site turns out different, that line tells you and your customer where the conversation starts.

How long should your price hold?

If your customer or the tender documents ask for a validity period, follow it. If nobody does, put an expiry date on the document. Base that date on how long your supplier and subcontractor prices hold, and on when you expect to start the work. No standard number of days fits every job. The date should come from the pricing behind that estimate.

An expiry date applies to a proposal that hasn't been accepted yet. It isn't a reason to change a price you've already agreed. If a proposal runs past its date without an answer, check your numbers again and send a revised version.

Should you charge for an estimate?

You can offer an initial estimate, based on the scope your customer describes, for free. Diagnostic work, a measured survey, design or a detailed takeoff can be a separate paid service, because each takes real time before the job is booked. Contractors handle this differently, so it's your decision.

Agree three things before you start: the fee, what your customer will receive, and whether you'll credit the fee if they book the job.

Start from a template

If you'd like a layout to work from, the fence estimate template is a free, editable starting point for jobs like this one. For other trades, try the contractor estimate template. Fill it with your own job details and prices.

If you'd rather not build every line by hand, Construction Job Estimator can help you put the estimate together in minutes on your phone. Describe the job by voice or text and add site photos. The app brings in real-time material prices from local suppliers and puts materials, labour and other job costs in one estimate. You can see the quantities, prices and labour behind each figure and adjust them to match your job. When the estimate looks right, prepare it to send to your customer, and convert it to an invoice once the work is agreed.

← Back to all guides

Construction Job Estimator

Your next estimate.
Ready in minutes.

Tell us what needs doing. Get real-time material prices from local suppliers, bring your labour and other costs together, and send your customer a professional estimate.

Take the next job from description to estimate.

★★★★★ Used by 10k+ contractors