A clear price. A professional first impression.

Free fence estimate templateMake the next job
look this good.

Show the fence, the gates and the installation work in one clear estimate. Start with a free PDF or Excel template, or take the job into our mobile app.

PDF & Excel · No signup for templates · By Daniel

FENCE ESTIMATEEST-001

Your fencing business

Prepared for: Sample customer

Garden fence replacement40 ft of fencing · One separate gate
Removal and disposal1 job × $300
$300
Posts and setting materials1 lot × $420
$420
Rails and infill materials40 ft × $14
$560
Gate and hardware1 set × $280
$280
Installation labour16 hours × $55
$880
Final site cleanup2 hours × $55
$110
Subtotal Before applicable tax$2,550USD

Scope and exclusions included in the download.

Illustrative example. Use your own quantities and prices.

Choose your starting point

A useful template.
Yours to keep.

Download it now, add your business details and make the numbers your own.

EXCEL

Edit. Calculate. Save.

Enter your quantities and selling rates. Line amounts, selected-line tax and the total calculate for you.

Download Excel

Includes a blank template and a completed example.

The details that make it clear

What should your fence estimate include?

A useful fence estimate connects each measured run to a specified fence system and makes removal, gates and installation visible.

Runs and gate openings

List fenced length, height and system by run. State gate widths separately from infill.

Posts and infill specification

Name post, rail and board or panel types. Check the chosen system before ordering setting materials.

Removal and disposal

Say whether old posts, concrete and fence waste are included in removal.

Gate supply and installation

Identify gate leaves, hardware, handing and fitting. State whether each price is supply-only or installed.

Ground and access assumptions

Describe the conditions you have priced and which findings would require a revised scope.

Total and work boundaries

Show the price, tax and validity, with exclusions for work such as staining or landscaping if not included.

From site visit to a clear figure

How to write your fence estimate in five steps.

  1. Walk and measure each run

    Record corners, changes in height, gates and access restrictions. Separate every gate opening from the fenced length.

  2. Choose the fence system

    Confirm the material and appearance with the customer, then build quantities from the specified system and actual layout.

  3. Price supply and site work

    Get the material prices and allow time for removal, setting out, installation and cleanup. Include deliveries and disposal where applicable.

  4. Review difficult or uncertain areas

    Write down assumptions about obstructions, ground conditions and restricted access. Explain how discoveries will be discussed before extra work.

  5. Check and issue the estimate

    Check for shared posts, duplicated gate widths and missing hardware. Present the finished scope and any optional treatments clearly.

Take the estimate with you

Job details in.
A clearer estimate out.

Bring the scope, materials and labour together in Construction Job Estimator. Review the breakdown and adjust it to suit the job, with your business details on the quote.

Create an estimate in the app
Illustration of a contractor reviewing a materials list on a tablet

See how the numbers fit

Fence estimate, worked through.

The sample separates a straight 40 ft fenced run from a 4 ft gate opening. The gate is priced once as materials and included in the installation labour; the opening is not counted as infill.

Illustrative selling prices in USD. These are example inputs, not local market rates.

Garden fence replacement with quantities and illustrative USD selling rates
Work / materialQuantityRateAmount
Removal and disposalExisting fence and gate removal, including waste1 job × $3001 job$300$300
Posts and setting materialsJob-specific post and setting-material allowance1 lot × $4201 lot$420$420
Rails and infill materialsSelected infill and rails for fenced length only40 ft × $1440 ft$14$560
Gate and hardwareMaterials for the separate 4 ft gate opening1 set × $2801 set$280$280
Installation labourSet out and install the fence and gate16 hours × $5516 hours$55$880
Final site cleanupTidy the work area after installation2 hours × $552 hours$55$110
Subtotal before applicable tax (USD)$2,550

Count fenced length only. The example totals 40 ft of infill plus a separate gate. The post line is a stated lot allowance, not a calculated post count or a footing design.

Check the site assumptions. Confirm access, gate swing, boundaries and ground conditions before replacing the illustrative quantities and prices. Removal includes waste disposal, while final cleanup covers tidying after installation.

Read the full estimating guide

Adapt the template to your job

Check these lines before you reuse the fence estimate

The sample estimate, EST-001, prices 40 ft of fence and one separate 4 ft gate at $2,550 USD before applicable tax. These are illustrative prices, not market benchmarks, so use your own costs for your job. Three lines need a second look before you send it to a customer.

Keep the gate on its own line The rails and infill row is 40 ft × $14 = $560. The separate 4 ft gate has its own $280 materials row, with fitting in the installation labor. Using 44 ft of infill would add material across the gate opening as well. Measure the fenced run and openings separately.

Settle old concrete and footings first The $300 removal line covers existing fence and gate removal, including waste. The sample doesn't say how old concrete or footings are handled, so don't assume that work is included or excluded at that price. Check the site, decide how you'll cover it, and agree the scope and price with your customer. If it changes your price, add or reword a line so they can see it. Final cleanup at $110 is only the tidy-up after installation, so don't charge for hauling waste a second time. Keep the exclusions as written, and change them only to match your job.

Treat the posts line as an allowance Posts and setting materials is one lot at $420. It's a job-specific allowance, not a calculated post count or a design. Replace it with a figure based on your own site and supplier prices. Then check the $14 per foot, $280 gate set and $55 hourly rate against your own costs. Change the 16 installation hours to suit the job, and make sure every quantity, unit and rate matches your scope text before you add up the total.

Before you send it

Four easy things to miss.

A little clarity here can save a difficult conversation later.

01

Charging infill across a gate

Exclude gate openings from the fenced length before adding the gate materials and fitting.

02

Counting a corner post twice

If two runs share a physical post, reconcile that post across the material list.

03

Leaving old concrete unpriced

Record whether removing existing post foundations is included, assumed straightforward or subject to inspection.

04

Mixing supply-only and fitted prices

Check whether the gate or panel price includes fitting before adding installation labour.

Choose what fits your next job

A template for a starting point.
An app for the whole estimate.

Use the free template

Useful when you want a familiar worksheet and already know the quantities and prices.

  • Print a PDF or edit the Excel file
  • Use your own materials and labour rates
  • Keep and organise the files yourself
Choose a download

Use Construction Job Estimator

Bring job details, measurements and site photos into your estimating workflow on your phone.

  • Review materials, quantities and labour together
  • Adjust the breakdown for the actual job
  • Prepare a quote with your business details

A few helpful answers

Fence estimate template FAQs.

Is this template free?

Yes. Download the blank PDF, completed PDF example and Excel workbook without an account or app installation.

Which format should I choose?

Use the PDF to print and fill in by hand. Choose Excel to edit quantities and selling rates with calculated line amounts, selected-line tax and totals. The workbook includes a separate completed example.

Can I use the workbook in Google Sheets?

Upload the .xlsx file to Google Drive and open it in Google Sheets. Check the layout and calculations after importing. This is an Excel file, not a hosted Google Sheets copy link.

Can I use this in the USA or Canada?

Yes. Enter your own USD or CAD prices and applicable tax treatment. The example is in USD. Changing the currency label does not convert prices or choose a tax rate.

Are the example prices recommended rates?

No. These are illustrative inputs for a fictional job, used to show the document structure and arithmetic. Replace them with inspected quantities and your own selling prices.

Does the template calculate fence materials automatically?

No. It calculates prices from your quantities and rates. Use the linked material calculator for a supported layout, then review the chosen system and site requirements.

How do I include a gate?

Add a separate gate and hardware line, identify its opening width and keep that width out of the infill quantity. Say whether gate installation is in that line or the labour total.

Does fence removal include breaking out old concrete?

The sample does not specify old concrete or footing breakout. Check the site and agree the removal method, waste handling and price before using the estimate. Do not assume the unchanged $300 allowance covers every footing condition.

Is there a faster way than filling in a template?

A template works well when you already have your figures. If you'd rather start from the job itself, Construction Job Estimator lets you describe it by voice or text, including your measurements, and add site photos. It brings in real-time material prices from local suppliers. You then review and adjust quantities, labour time, rates and markup before sending a professional estimate. It runs on iOS and Android.

Can I edit this in the browser?

Yes. Open the optional browser editor below. Download or print a copy before leaving: the editor does not save entries after a refresh.

Prefer to fill it in here?Open the free browser editor.

Make it your own.

Add your job details and review the totals.

Enter your applicable tax rate. Tax applies only to marked lines.

Enter selling rates, including any overhead and profit you intend to charge. Currency changes the label, not the amounts.

Line 1
Line 2
Line 3
Line 4
Line 5
Line 6

Your entries stay in this page. Download a copy before closing; refreshing clears them.