Print and fill it in
A clean, one-page worksheet with task-specific line items and space for scope, exclusions and payment notes.
Download blank PDF Get the completed exampleA clear price. A professional first impression.
Download a printable blank PDF, a completed sample PDF or an editable Excel template for your vinyl fence installation estimate. The sample prices ten bays, eleven posts and no gate at $4,042 before applicable tax. Swap in your own costs and system dimensions.
PDF & Excel · No signup for templates · By Daniel
Prepared for: Sample customer
Scope and exclusions included in the download.
Choose your starting point
Download it now, add your business details and make the numbers your own.
A clean, one-page worksheet with task-specific line items and space for scope, exclusions and payment notes.
Download blank PDF Get the completed exampleEnter your quantities and selling rates. Line amounts, selected-line tax and the total calculate for you.
Download ExcelIncludes a blank template and a completed example.
The details that make it clear
Download a blank PDF to print and fill in, a completed example PDF, or an Excel workbook with formulas and eight editable line rows. Add your business and customer details, describe the scope and exclusions, then enter descriptions, quantities, units and rates. The separate browser editor on this page is another way to prepare your estimate.
Take the bay width and post dimensions from the fence system you're actually installing. Then update the layout length in your scope. The 60 ft in the sample is a planning figure, not a rule for your job.
Count posts from your layout, including ends, line posts, corners and any gate posts. The sample's eleven sets suit a ten-bay straight run only. Put your count in the quantity column.
List the inserts, brackets, fasteners and footing materials your system documentation calls for. The $150 and $180 packages are sample allowances. Replace them with your own takeoff and supplier prices.
Enter the person-hours for layout and post work, then for panel work, at your own hourly selling rate. Cleanup stays on its own line. Check that no labor sits in two places.
Write what the customer is getting, then list what stays out. Fit the exclusions to the site: removal, retaining work, rock, surveying, permits and anything else you haven't priced.
The example subtotal is before applicable tax. In the Excel workbook or browser editor, mark the taxable lines and enter the rate that applies to your job. Check the resulting tax and final total before sending. Count overhead and profit once in your selling prices.
From site visit to a clear figure
Start at the top of the form. Describe the run, the fence system, and what's included, then list the exclusions. Doing this first keeps the price tied to a clear job.
Work out the bay count from your assessed run and the system's actual dimensions. Then count posts, adding any ends, corners or gates. These two numbers drive most of your material lines.
Enter panel kits, posts and caps, supports and hardware, and footing materials. Use your own supplier prices, marked up so overhead and profit are in each line once. Don't add rails separately if the kits include them.
Put layout and post installation on one line and panel installation on another, each in hours at your rate. Total person-hours are the sum of both lines. Keep the descriptions specific so the customer sees what the hours cover.
Enter cleanup and handover, then total the lines. Don't apply a second markup to the subtotal. Show applicable tax separately, then print the PDF or send the Excel file.
Take the estimate with you
Bring the scope, materials and labour together in Construction Job Estimator. Review the breakdown and adjust it to suit the job, with your business details on the quote.
Create an estimate in the app
See how the numbers fit
This sample covers ten bays of the selected vinyl privacy fence system on an assessed straight run, about 60 ft overall. It includes posts, caps, supports, footings and installation. Gates, existing fence removal, retaining work, rock excavation, surveying and permit fees are excluded. Sloping ground or stepped panels need a revised system layout. All amounts are illustrative selling prices with overhead and profit included once.
Illustrative selling prices in USD. These are example inputs, not local market rates.
| Work / material | Quantity | Rate | Amount |
|---|---|---|---|
| Vinyl panel kitsTen specified bays; each kit includes its matching rails and infill.10 kits × $145 | 10 kits | $145 | $1,450 |
| Posts and capsTwo end posts and nine line posts with compatible caps.11 sets × $42 | 11 sets | $42 | $462 |
| Supports and hardwareSpecified inserts, brackets and fasteners not already included in kits.1 package × $150 | 1 package | $150 | $150 |
| Footing materialsMaterials for the approved post/footing schedule.1 package × $180 | 1 package | $180 | $180 |
| Layout and post installationSet out and install posts to approved system and assessed site.16 hours × $65 | 16 hours | $65 | $1,040 |
| Panel installationFit ten panel kits and specified accessories.10 hours × $65 | 10 hours | $65 | $650 |
| Cleanup and handoverFinal checks, packaging disposal and cleanup.1 job × $110 | 1 job | $110 | $110 |
| Subtotal before applicable tax (USD) | $4,042 | ||
Why ten bays need eleven posts On a straight run, ten consecutive bays need two end posts plus nine line posts, which makes eleven. This schedule has no gate and no corner posts. Add either one and the post count, and likely the hardware, changes, so recount from your actual layout.
Rails and labor are counted once Each panel kit includes its matching rails and infill, so rails don't get their own line. Labor is 26 person-hours: 16 for layout and post installation, 10 for panel installation. Cleanup and handover is a separate package of $110. Don't add an all-in labor package on top of those hourly lines.
These figures belong to the sample The sample subtotal is $4,042 before applicable tax. Replace the illustrative USD prices with your own. About 60 ft is a planning length, not an exact installed length calculated from ten nominal six-foot panels; check the actual bay and post dimensions.
Before you send it
A little clarity here can save a difficult conversation later.
Ten panels on a straight run need eleven posts, not ten. Miss that one post and you've underpriced material and labor on every fence you quote that way.
If the panel kit includes its rails, a separate rail line charges the customer for them twice. That inflates your price, and a sharp customer will spot it. Check what each kit includes before you list anything else.
Ten nominal six-foot panels don't guarantee a 60 ft installed run. Real bay and post dimensions differ by system. Use the actual dimensions, or your counts may not match the fence you build.
Skip the exclusions and a customer can read removal, rock or permits as included. Adding an all-in labor package on top of hourly lines also charges the same work twice. Write the exclusions out and keep labor in one place.
Choose what fits your next job
Useful when you want a familiar worksheet and already know the quantities and prices.
Bring job details, measurements and site photos into your estimating workflow on your phone.
A few helpful answers
Yes. Download the blank PDF, completed PDF example and Excel workbook without an account or app installation.
Use the PDF to print and fill in by hand. Choose Excel to edit quantities and selling rates with calculated line amounts, selected-line tax and totals. The workbook includes a separate completed example.
Upload the .xlsx file to Google Drive and open it in Google Sheets. Check the layout and calculations after importing. This is an Excel file, not a hosted Google Sheets copy link.
Yes. Enter your own USD or CAD prices and applicable tax treatment. The example is in USD. Changing the currency label does not convert prices or choose a tax rate.
No. These are illustrative inputs for a fictional job, used to show the document structure and arithmetic. Replace them with inspected quantities and your own selling prices.
Add the gate or corner to your scope and recount the posts using the selected system instructions. Price its materials and labor in the spare workbook row, or use the browser editor if you need more lines.
Print the blank PDF if you fill in estimates by hand on site. Use the Excel file when you want formulas to total the lines and descriptions you can edit. If you'd rather start from job details than a blank form, Construction Job Estimator can turn your measurements, photos and local supplier prices into a working estimate that you review and adjust.
The sample assumes a straight run, so sloping ground or stepped panels need a revised system layout. Recount bays, posts and hardware from that layout. Then adjust your person-hours to match.
The example subtotal is before applicable tax. In the Excel workbook or browser editor, mark the taxable lines and enter the rate that applies to your job. Check the resulting tax and final total before sending.
Yes. Open the optional browser editor below. Download or print a copy before leaving: the editor does not save entries after a refresh.
Add your job details and review the totals.
Your entries stay in this page. Download a copy before closing; refreshing clears them.