How to estimate a deck job and prepare your bid

Price the whole deck job, from the specified foundations to the final cleanup. Follow a 12x12 example and see how board quantities, labor and markup become a bid.

3D contractor reviewing a deck sketch beside timber boards in a garden

Before you start

  • Price a defined design, including the frame, surface, site work and any stairs or railings.
  • Count stock boards and person-hours before adding overhead and profit.
  • Send your customer a clear scope and price, with selections and assumptions recorded.

To bid a deck job, start with the agreed dimensions and written specification. Take off materials from the design, price person-hours, equipment, access, disposal and approvals, then add overhead and profit. Send your customer the scope and the total. Here’s how to build that price, using a 12x12 deck as a worked example.

Pin down the scope before you price

Several scope items change a deck bid more than square footage does:

  • New deck or resurfacing. On a resurface, inspect the supports and frame you're keeping. New boards don't confirm the frame underneath is sound, so price any agreed repairs as their own line.
  • Footprint and height. Get the finished size and height above grade, and whether the deck is freestanding or attached.
  • Surface. Confirm the decking product, board direction and any borders or picture-frame details.
  • Other work. Include any stairs, railings, fascia and demolition. Confirm what the design requires before treating these as optional extras.
  • Site. Check access, how far you carry deliveries, where excavation spoil goes and how waste leaves the site.
  • Design and approvals. Decide who supplies the structural design and who handles approvals.

Get the design and any local requirements settled before giving a firm price. You need the specified joists, supports and connections to price them properly. Check the approval and guard requirements for the actual site, even for a low deck.

Take off materials from the design

Build the material list in groups: foundations and supports, framing and the connectors the design calls for, deck boards, fixings, fascia, then stairs and guards if specified. Use the drawing and your selected product's instructions. Work from actual dimensions, stock lengths, pack sizes and cuts, not nominal sizes.

Count surface boards separately, then check the layout against the supporting frame. Board direction and joints affect what you buy and where support is needed. Board spacing comes from the selected manufacturer, so check their instructions for side and end gaps. Trex's spacing guide is one example of why: gaps vary with the product and conditions.

When you get a supplier quote, check the products, quantities, pack sizes, delivery charge, tax treatment and expiry date. Don't assume fasteners or fascia come with the boards. While you wait for that quote, Construction Job Estimator can show real-time material prices from local suppliers, including shops you may already use. That gives you working numbers for the takeoff, and you can edit any price once the written quote arrives.

How much should I charge for a 12x12 deck?

Size alone doesn't give you a price. Here is one fully costed example. These are sample prices in USD before applicable tax. Replace them with your own quotes and rates.

The specified job: a 12x12 ft (144 sq ft) freestanding low platform with straight decking and fascia all around. It has no demolition, stairs, guardrails, services or finish coating. The example assumes the supplied design and site review confirm that no stairs or guards are needed. Access is clear, ground conditions are suitable for the specified foundations, and rock excavation is excluded. Design preparation is outside this bid. The $180 approval fee below is a sample cost; confirm any required approval and its actual fee for your job.

Surface takeoff. The boards run 12 ft, and the actual board width is 5.5 in, not 6 in. This example uses a 1/8 in side gap as a project-specification choice, not universal advice.

  • Rows across 144 in: (144 + 0.125) ÷ (5.5 + 0.125) ≈ 25.6, which rounds up to 26 rows. Round up because a partial row still needs a full board. Then check the final edge and cuts.
  • Buy 16 ft stock for each 12 ft run so you can trim. No offcut reuse is assumed. If shorter stock is available, compare delivered cost and your cutting plan.
  • Add a 10% spare-board allowance: 26 × 1.10 = 28.6, so 29 boards. That 10% is a choice here. The longer stock already accounts for the length offcuts; this extra allowance covers spare boards. Check both before ordering.
  • At a sample $42 per 16 ft board, 29 × $42 = $1,218.

The deck material calculator runs this rows-and-stock-pieces math for the surface. It covers boards only, not the frame.

Item Basis Sample cost (USD)
Footing/support materials Specified for supplied design 640
Framing lumber Sample total from the specified layout 980
Framing connectors/hardware Separate from surface fixings 210
Deck boards 29 boards × $42 1,218
Fascia/edge materials Fascia all around 196
Surface fixings and consumables Separate from framing hardware 86
Own labor 64 person-hours × $42 2,688
Equipment hire Hire cost only, not your labor 180
Delivery Materials to site 140
Haul/disposal Haul and fee; on-site handling is in labor 90
Approval fee Sample placeholder 180
Direct costs Materials, labor and site costs 6,608
Markup 25% of direct costs, covering overhead and profit 1,652
Bid before tax Direct costs + markup 8,260

The material lines are sample takeoff totals for a supplied design, not quantities to build from. Footing materials exclude labor, since you count your own labor once. The $42 labor rate includes employment cost but excludes company overhead and profit.

The 25% markup is an example choice, not an industry norm. Markup is added to cost. Gross margin is the share of your selling price left after these job costs, before company overhead. Here a 25% markup gives a 20% gross margin ($1,652 ÷ $8,260). That $1,652 has to cover overhead first, so don't call it net profit. The contractor markup calculator converts between the two.

How much should I charge for labor to build a deck?

Price the actual tasks in person-hours, not a single per-square-foot labor rate. Person-hours are hours worked by each person added together. Two workers each working eight hours contribute 16 person-hours, even if they work together in one day.

The sample plan for the 12x12:

Task Person-hours
Site prep and footings 20
Framing 18
Deck boards and fascia 18
Site cleanup 6
Job coordination 2
Total 64

At the sample $42 per hour, labor costs you $2,688. That rate is your job cost, including employment cost. It isn't what you bill your customer. Allow for curing time and inspections in the schedule. Waiting time can extend the calendar, while return visits or crew downtime you must pay for can also add labor cost.

At the same 25% markup, the labor portion of the price is $3,360 before tax. For a labor-only bid, $3,360 would be the starting labor portion in this example. Add any equipment, travel or other costs you must cover, and agree who supplies materials and handles delivery. If your hourly rate already includes overhead and profit, don't add markup on top a second time. Set the hours from your crew, access and fixing method; the sample plan isn’t a productivity target. For a fuller method, see the guide on how to estimate labor costs.

What materials do you need for a 12x20 deck?

A 12x20 deck is 240 sq ft, but that only sets the footprint. To order materials, you still need the support layout, deck height, board direction and chosen products. Start with these groups, then count the specified components from the drawing:

  • Approved foundation and support materials
  • Specified framing, plus a ledger or freestanding connections
  • Decking stock and layout
  • Compatible fasteners
  • Fascia and borders
  • Stair and guard assemblies where the design calls for them
  • Flashing or other protection where connections need it
  • Finish, if the customer chose one

For the surface only, use the same 5.5 in board, 1/8 in gap and 12 ft runs across the 20 ft side:

  • Rows: (240 + 0.125) ÷ 5.625 ≈ 42.7, which rounds up to 43 rows.
  • With 10% spares: 43 × 1.10 = 47.3, so 48 boards of 16 ft.

That count excludes picture-frame borders, stairs and framing. Board direction matters a lot. Running boards the other way changes row count, board length and where joints land on the frame.

Don't scale the $8,260 bid by 240 ÷ 144 and call it a price. Support layout, height, access and railings all change the cost.

What to include before you send the bid

Keep your cost worksheet separate from the estimate your customer sees. You don't need to show internal margin unless the agreement requires it. Before you send, check that the bid states:

  • The selected materials and specifications
  • The included work, in detail
  • The design reference
  • The price, and whether tax is included or added
  • Delivery and disposal
  • Whether stairs and guards are in or out
  • Assumptions about unknown ground or a retained frame, and how changes get priced
  • Who handles approvals
  • Your schedule window, payment terms and how long the bid stays valid

The free deck estimate template gives you a PDF or Excel layout for this.

Put the bid together in Construction Job Estimator

If you'd rather not rebuild the cost sheet for every deck, Construction Job Estimator can get you to a professional estimate in minutes. Describe the job by voice or text and add site photos, and it builds a working estimate with materials, labor and other job costs together. You can see the quantities, prices and labor behind each figure, then adjust them to match your agreed design, your crew's person-hours and your markup. When the customer accepts, you can convert the estimate into an invoice. Your specification and site checks still set the quantities. See how it works for deck estimates.

← Back to all guides

Construction Job Estimator

Your next estimate.
Ready in minutes.

Tell us what needs doing. Get real-time material prices from local suppliers, bring your labour and other costs together, and send your customer a professional estimate.

Take the next job from description to estimate.

★★★★★ Used by 10k+ contractors