Free deck board material calculator

How many decking boards should you buy?

Enter your deck dimensions, board width and stock length. Get a surface-board allowance with a clear calculation behind it.

Free to use · No signup · By Daniel

Measure your deck.

Use your own figures or try the example.

Your entries stay in this page. Refreshing clears them.

Your decking allowance.

Calculated from the figures you enter.

A clear starting point
for the job ahead.

Fill in your measurements or costs to see the result and its breakdown here.

Construction Job Estimator app

Ready for the whole job?

Turn your decking quantities into a complete job estimate.

Keep the scope, materials and labour together in Construction Job Estimator.

Create an estimate in the app

Know what goes into the number.

Count rows before stock pieces

The row count is the deck width plus one gap, divided by board width plus gap, rounded up. For each row, divide deck length by stock-board length and round up. Multiply rows by pieces per row, add your waste allowance and round up again.

1

Choose the board direction.

Length runs along the boards. Width runs across them. Enter the rectangular deck dimensions in the selected units.

2

Check board width and gaps.

Use the actual board width, side gap and stock length you will purchase. Take the gap from your selected product’s installation instructions.

3

Count rows and stock pieces.

Round up the number of rows, then the stock pieces needed for each row. Apply your waste allowance and round up the final board count.

Worked example

See the calculation
come together.

A 12 × 10 ft rectangular deck with 5.5 in boards and 0.25 in side gaps needs ceiling((120 + 0.25) ÷ 5.75), or 21 rows. Using 12 ft stock gives one board per row. Adding 10% waste gives 24 stock boards. All dimensions and allowances here are illustrative.

Illustrative inputs. Replace them with the figures for your job.

The example breakdown

Deck surface
120 sq ft
Board rows across deck
21 rows
Stock pieces per row
1 pieces
Stock boards including waste
24 boards

Check the details before you quote.

The surface is only one part.

Framing, posts, fixings, stairs, fascia and railings are separate. Add those items when preparing a complete job estimate.

Review joints and offcuts.

This is a conservative allowance with no reuse of offcuts between rows. It does not optimise staggered joints or plan their support.

Separate complex shapes.

Borders, diagonal boards and irregular decks need a detailed layout. Break down simple areas carefully and check how the pieces meet.

What this estimate leaves out

This is a conservative surface-board allowance with no reuse of offcuts between rows. It does not optimise staggered joints or include end gaps, borders, diagonal layouts, steps, fascia, framing or fixings. Follow the chosen product’s installation guide for gaps and support details; this is not a structural design tool.

Product information to check: Trex product installation guides.

Common questions

Does this calculate the deck frame?

No. It calculates surface boards only. It does not size joists, beams, supports or foundations.

What happens if the deck is longer than one board?

The tool rounds up the stock pieces required for each row. You still need to plan joints, end gaps and support positions separately.

Can I change between feet and metres?

Yes. Deck and stock lengths convert between feet and metres; board width and side gaps convert between inches and millimetres.

Does this include reuse of offcuts?

No. It calculates stock pieces row by row. A checked cutting plan may let you reuse some material, but that is not assumed here.

Can I save the calculation?

Yes. Once your inputs are complete, download a CSV or use Print / save PDF. Your copy includes the inputs and calculation limits. Refreshing this page clears your entries.