A clear price. A professional first impression.

Free deck estimate templateMake the next job
look this good.

Use the PDF if you want to print the estimate and fill it in by hand. Use the Excel file if you want to edit lines, quantities and rates. Both show a 12×10 ft low-level deck with illustrative USD prices before tax.

PDF & Excel · No signup for templates · By Daniel

DECK ESTIMATEEST-001

Your decking business

Prepared for: Sample customer

Rectangular low-level deck12 × 10 ft footprint
Footings and supports1 lot × $420
$420
Framing supply1 lot × $650
$650
Deck boards24 boards × $28
$672
Fixings and fascia1 lot × $210
$210
Installation labour24 hours × $55
$1,320
Cleanup and handover1 job × $120
$120
Subtotal Before applicable tax$3,392USD

Scope and exclusions included in the download.

Illustrative example. Use your own quantities and prices.

Choose your starting point

A useful template.
Yours to keep.

Download it now, add your business details and make the numbers your own.

EXCEL

Edit. Calculate. Save.

Enter your quantities and selling rates. Line amounts, selected-line tax and the total calculate for you.

Download Excel

Includes a blank template and a completed example.

The details that make it clear

What should your deck estimate include?

The template has six priced lines, a scope statement and an exclusions note. Each line has a quantity, unit, rate and short detail, so your customer can see what the price covers. Replace the sample figures with your own.

Footings and supports

Name the specified footing layout and what the line supplies. State whether footing labor is priced here or elsewhere. The sample labor hours don't cover it, so confirm the scope before you reuse the $420.

Framing supply

Take joists, beams and connectors from the drawings or design, not from memory. Write the quantity and detail so the customer sees the frame is built to a specification.

Deck boards

Rebuild the count from your own layout. Check board width, gap, direction and cuts, then enter your stock length. The 24-board figure is only an illustrative allowance.

Fixings and fascia

Match this line to the surface system you selected. Fixings and fascia change with the product, so update the detail text when you change the boards.

Installation labor

Estimate person-hours for the work you will do. The sample’s 24 hours cover frame and surface only. Put footing labor in the footing package or a separate line, with its scope clearly stated; do not also count it in the frame hours.

Cleanup and handover

Describe what you'll do: clear offcuts and review the finish with the customer. Keep it a separate line so it isn't buried in labor or materials.

From site visit to a clear figure

How to write your deck estimate in five steps.

  1. Pick the file that fits the job

    Choose the blank PDF to print and write on. Choose Excel to edit descriptions, quantities and selling rates. The completed example shows the layout; replace its assumptions before using it for a customer.

  2. Get the design settled first

    Quantities are only reliable once the selected drawings or design define them. The template organizes your price, but it can't set footing layout, framing or surface details for you.

  3. Replace each sample row

    Enter quantities from your design and current supplier costs. Build selling rates that recover your overhead and profit once, then update the descriptions. A raw material or subcontractor cost is not automatically your customer price.

  4. Write the scope and exclusions plainly

    Say what you're building and what the price leaves out. Keep stairs, railings and guards visible. If the design requires them, price them or name who supplies them.

  5. Check the total before sending

    Add up your rows, then confirm footings, labor and surface each appear once. Add applicable tax the way you normally do. Send the customer a document with no unexplained gaps.

Take the estimate with you

Job details in.
A clearer estimate out.

Bring the scope, materials and labour together in Construction Job Estimator. Review the breakdown and adjust it to suit the job, with your business details on the quote.

Create an estimate in the app
Illustration of a contractor reviewing a materials list on a tablet

See how the numbers fit

Deck estimate, worked through.

EST-001 prices a rectangular low-level deck with a 12×10 ft footprint, which is 120 sq ft. The sample subtotal is $3,392 before tax. These are sample prices in USD; use your own costs for your job.

Illustrative selling prices in USD. These are example inputs, not local market rates.

Rectangular low-level deck with quantities and illustrative USD selling rates
Work / materialQuantityRateAmount
Footings and supportsSpecified footing layout, not a design allowance1 lot × $4201 lot$420$420
Framing supplyJoists, beams and connectors from drawings1 lot × $6501 lot$650$650
Deck boards12 ft stock allowance, layout to be checked24 boards × $2824 boards$28$672
Fixings and fasciaSelected surface system1 lot × $2101 lot$210$210
Installation labourPerson-hours for frame and surface24 hours × $5524 hours$55$1,320
Cleanup and handoverClear offcuts and review finish1 job × $1201 job$120$120
Subtotal before applicable tax (USD)$3,392

The board count is an allowance The 24 boards of 12 ft are an illustrative stock allowance, not a verified takeoff. Board width, gap, direction and cuts are unspecified, so recount the surface from your own layout before you reuse the line.

Labor covers frame and surface only The 24 person-hours cover frame and surface work. The footing/support lot does not spell out its labor allowance. Before using it, define which materials and installation tasks the package covers, then include each cost once. The sample is not a complete footing specification.

Exclusions describe this sample The example excludes design fees, demolition, stairs, railings and concealed ground conditions. That does not make stairs or guards optional. If your design requires them, price them or say clearly who covers them.

Read the deck estimating guide

Before you send it

Four easy things to miss.

A little clarity here can save a difficult conversation later.

01

Counting footing labor twice or not at all

The sample labor covers frame and surface only. If you add footing labor to the footings line and again to installation, the customer pays twice. If you assume it's included, you may leave it unpriced.

02

Treating the board count as a takeoff

Twenty-four boards is an illustrative allowance. It doesn't account for your board width, gap, direction or cuts. Recount from your own layout before the number goes into a customer estimate.

03

Letting exclusions hide required work

Listing stairs or railings as excluded can look like they're optional. When the design requires them, price them or state who covers them, so the customer isn't surprised later.

04

Forcing a repair job into the new-build lines

The template fits a new low-level deck. A repair or resurfacing job starts from what's already there, so your lines and scope need to say what you're keeping and what you're replacing.

Choose what fits your next job

A template for a starting point.
An app for the whole estimate.

Use the free template

Useful when you want a familiar worksheet and already know the quantities and prices.

  • Print a PDF or edit the Excel file
  • Use your own materials and labour rates
  • Keep and organise the files yourself
Choose a download

Use Construction Job Estimator

Bring job details, measurements and site photos into your estimating workflow on your phone.

  • Review materials, quantities and labour together
  • Adjust the breakdown for the actual job
  • Prepare a quote with your business details

A few helpful answers

Deck estimate template FAQs.

Is this template free?

Yes. Download the blank PDF, completed PDF example and Excel workbook without an account or app installation.

Which format should I choose?

Use the PDF to print and fill in by hand. Choose Excel to edit quantities and selling rates with calculated line amounts, selected-line tax and totals. The workbook includes a separate completed example.

Can I use the workbook in Google Sheets?

Upload the .xlsx file to Google Drive and open it in Google Sheets. Check the layout and calculations after importing. This is an Excel file, not a hosted Google Sheets copy link.

Can I use this in the USA or Canada?

Yes. Enter your own USD or CAD prices and applicable tax treatment. The example is in USD. Changing the currency label does not convert prices or choose a tax rate.

Are the example prices recommended rates?

No. These are illustrative inputs for a fictional job, used to show the document structure and arithmetic. Replace them with inspected quantities and your own selling prices.

Can I use this template for repair or resurfacing?

Yes. For a repair, list the damaged parts and what stays. For resurfacing, distinguish the new surface from any frame repairs identified on inspection. You can also use our deck repair estimate template for a more focused starting point.

Should I use the PDF or the Excel file?

Print the blank PDF to fill in by hand, or use Excel to edit descriptions, quantities and rates. The completed PDF and the workbook’s example sheet show the sample deck.

Does the $420 footings line include labor?

The sample does not specify the footing package’s labor scope. Its separate 24 person-hours cover frame and surface only. Define the footing materials and installation work before reusing the $420 allowance, and price any additional work explicitly.

Can I build this estimate in Construction Job Estimator instead?

Yes, if you'd rather describe the job by voice or text, add your measurements and site photos, and review a working estimate. It's a mobile app for iOS and Android. You still check the scope and figures. A template works well if you already have costs and drawings.

Can I edit this in the browser?

Yes. Open the optional browser editor below. Download or print a copy before leaving: the editor does not save entries after a refresh.

Prefer to fill it in here?Open the free browser editor.

Make it your own.

Add your job details and review the totals.

Enter your applicable tax rate. Tax applies only to marked lines.

Enter selling rates, including any overhead and profit you intend to charge. Currency changes the label, not the amounts.

Line 1
Line 2
Line 3
Line 4
Line 5
Line 6

Your entries stay in this page. Download a copy before closing; refreshing clears them.