Measure the work.
Jacks, kings, cripples and header members come from the specified layout.
Free framing and stud calculator
Start with one straight wall run. Add the extra studs shown on your opening, corner and junction details.
Free to use · No signup · By Daniel
Use your own figures or try the example.
Calculated from the figures you enter.
Fill in your measurements or costs to see the result and its breakdown here.
Ready for the whole job?
Keep the scope, materials and labour together in Construction Job Estimator.
Create an estimate in the appKnow what goes into the number.
Round wall length ÷ spacing up, then add one end stud. Add the separately counted detail studs and waste. Count each plate run in whole stock lengths.
Jacks, kings, cripples and header members come from the specified layout.
Round wall length ÷ spacing up, then add one end stud. Add the separately counted detail studs and waste. Count each plate run in whole stock lengths.
A conservative takeoff only: openings are not deducted from the grid. It does not size studs, headers, connections or plate laps. Confirm actual framing with the drawings.
Worked example
20 ft at 16 in spacing requires 16 grid studs. Add 6 detail studs and 10% waste for an allowance of 25 studs. Three 20 ft plate runs use six 10 ft lengths before cutting review.
Illustrative inputs. Replace them with the figures for your job.
The example breakdown
Jacks, kings, cripples and header members come from the specified layout.
Different stud lengths require separate quantities and orders.
The plate stock count does not allow for special overlaps or optimise offcuts.
A conservative takeoff only: openings are not deducted from the grid. It does not size studs, headers, connections or plate laps. Confirm actual framing with the drawings.
No. The worked example uses illustrative inputs. Enter current supplier quotes and your own labour and business costs.
Use the measurement units shown beside each field and keep all prices in one currency. Currency selection labels amounts; it does not convert them.
A conservative takeoff only: openings are not deducted from the grid. It does not size studs, headers, connections or plate laps. Confirm actual framing with the drawings.
Yes. Once your inputs are complete, download a CSV or use Print / save PDF. Your copy includes the inputs and calculation limits. Refreshing this page clears your entries.