Measure the work.
Panel direction and support positions can affect the cutting layout.
Free plywood sheet calculator
Calculate an area-based sheet allowance and material cost from the sheet sizes you plan to buy.
Free to use · No signup · By Daniel
Use your own figures or try the example.
Calculated from the figures you enter.
Fill in your measurements or costs to see the result and its breakdown here.
Ready for the whole job?
Keep the scope, materials and labour together in Construction Job Estimator.
Create an estimate in the appKnow what goes into the number.
Multiply sheet length by width for coverage. Add your waste allowance to the surface area, divide by sheet coverage and round up.
Panel direction and support positions can affect the cutting layout.
Multiply sheet length by width for coverage. Add your waste allowance to the surface area, divide by sheet coverage and round up.
Does not optimise cuts or select panel grade, span rating, thickness or fixing requirements.
Worked example
480 sq ft with 10% allowance is 528 sq ft. A 4 × 8 ft sheet covers 32 sq ft, so the order allowance is 17 sheets.
Illustrative inputs. Replace them with the figures for your job.
The example breakdown
Panel direction and support positions can affect the cutting layout.
Check the usable dimensions and any required gaps.
Run wall, roof and floor panels separately if their thickness or grade differs.
Does not optimise cuts or select panel grade, span rating, thickness or fixing requirements.
No. The worked example uses illustrative inputs. Enter current supplier quotes and your own labour and business costs.
Use the measurement units shown beside each field and keep all prices in one currency. Currency selection labels amounts; it does not convert them.
Does not optimise cuts or select panel grade, span rating, thickness or fixing requirements.
Yes. Once your inputs are complete, download a CSV or use Print / save PDF. Your copy includes the inputs and calculation limits. Refreshing this page clears your entries.