Print and fill it in
A clean, one-page worksheet with task-specific line items and space for scope, exclusions and payment notes.
Download blank PDF Get the completed exampleA clear price. A professional first impression.
This tile estimate template comes with a filled-in kitchen floor example, so you can see how a clean estimate reads before you build your own. Print the PDF and fill it in by hand, or edit the Excel file on screen.
PDF & Excel · No signup for templates · By Daniel
Prepared for: Sample customer
Scope and exclusions included in the download.
Choose your starting point
Download it now, add your business details and make the numbers your own.
A clean, one-page worksheet with task-specific line items and space for scope, exclusions and payment notes.
Download blank PDF Get the completed exampleEnter your quantities and selling rates. Line amounts, selected-line tax and the total calculate for you.
Download ExcelIncludes a blank template and a completed example.
The details that make it clear
The template has a scope line, six priced rows, written exclusions, and space for your business, customer and reference. The sample is built around one job, so read it before you change it. A few lines need an answer from your installer or customer first.
Start with your measured installed area, then work out how many boxes you need from the coverage per box of the tile you've chosen. Price installation on the installed area and the tile on the boxes you'll buy.
The sample's 10% is one choice for one job. Decide your allowance from your own tile, layout and supplier, then write the resulting box count on the material row so the customer can follow it.
State whether your per-square-foot selling rate includes grouting and fitting trim. If you use a subcontractor, check their written inclusions before building your customer price. Add labor only for tasks not already covered.
The sample does not define these tasks. Agree who removes the old covering and who moves or reconnects appliances. Price any work you take on, or state clearly that someone else will handle it.
The sample excludes waterproofing, major leveling, structural substrate repairs and underfloor heating. If any of these apply to your job, they need their own scope and price, and the exclusion line should change.
Adhesive and grout ($180) and trims and transitions ($80) are material allowances. Check them against the products and doorway and edge details you've actually selected, and replace the sample amounts.
From site visit to a clear figure
Enter the measured installed area. Add your allowance for cuts and spares, divide by the chosen tile’s coverage per box and round up to whole boxes. Enter the resulting box count and your selling price per box, accounting for overhead and profit once.
Swap in your own hours and rates for surface preparation and cleanup. Keep the preparation description honest: the sample covers minor work on a sound substrate, and bigger preparation needs its own line.
Set a selling rate for the installation work you have agreed, including grouting and trim fitting where intended. If a subcontractor supplies a rate, treat it as a cost input. Add separate labor only for work outside that agreed scope.
Give removal, appliance moving or any other agreed work its own row. Then edit the exclusions so the written scope matches what you and the customer agreed.
The sample total is before applicable tax, so add your own tax treatment where it applies. Fill in the customer name, reference and business details, and check every total before it goes out.
Take the estimate with you
Bring the scope, materials and labour together in Construction Job Estimator. Review the breakdown and adjust it to suit the job, with your business details on the quote.
Create an estimate in the app
See how the numbers fit
This sample is a 120 sq ft kitchen floor with a straight layout. The six rows total $1,868 before applicable tax. These are illustrative USD prices, not market benchmarks, so use your own costs for your job.
Illustrative selling prices in USD. These are example inputs, not local market rates.
| Work / material | Quantity | Rate | Amount |
|---|---|---|---|
| Surface preparationMinor preparation on a sound substrate4 hours × $60 | 4 hours | $60 | $240 |
| Tile material12 sq ft per box; 132 sq ft purchased11 boxes × $48 | 11 boxes | $48 | $528 |
| Adhesive and groutSelected products and coverage1 lot × $180 | 1 lot | $180 | $180 |
| Tile installationLabour on installed area120 sq ft × $6 | 120 sq ft | $6 | $720 |
| Trims and transitionsAgreed doorway and edge details1 lot × $80 | 1 lot | $80 | $80 |
| Cleanup and handoverFinal clean and care instructions2 hours × $60 | 2 hours | $60 | $120 |
| Subtotal before applicable tax (USD) | $1,868 | ||
Installed area versus area bought The floor being tiled is 120 sq ft, and the installation row is priced on that at $6 per sq ft. Tile is bought by the box. 11 boxes at 12 sq ft each is 132 sq ft, and at $48 a box that's $528.
The extra 12 sq ft is a sample choice The gap between 120 and 132 sq ft is a 10% allowance picked for this sample. It isn't a waste factor to copy. Set your own allowance for your tile, layout and supplier.
Hours and square feet are different lines Preparation is 4 hours × $60 = $240; cleanup is 2 hours × $60 = $120. Installation is 120 sq ft × $6 = $720. These are selling rates, including overhead and profit once, rather than wages or raw costs.
Before you send it
A little clarity here can save a difficult conversation later.
It's easy to treat 132 sq ft as the standard for every tile job. It's just what this sample uses. A different tile or layout may need a different extra amount, so decide it for each job.
Decide what your installation rate includes. If grouting or trim fitting is already covered, do not add it again. If you subcontract the work, check the written scope and build your selling price from that cost.
The sample says nothing about either. If the customer expects them and your estimate is silent, you've left a gap. Agree them and price them before the estimate goes out.
Every price here is illustrative. Your hours, box price, adhesive and grout cost, trim cost and installation rate come from your own costs and suppliers. Replace each one before you send the estimate.
Choose what fits your next job
Useful when you want a familiar worksheet and already know the quantities and prices.
Bring job details, measurements and site photos into your estimating workflow on your phone.
A few helpful answers
Yes. Download the blank PDF, completed PDF example and Excel workbook without an account or app installation.
Use the PDF to print and fill in by hand. Choose Excel to edit quantities and selling rates with calculated line amounts, selected-line tax and totals. The workbook includes a separate completed example.
Upload the .xlsx file to Google Drive and open it in Google Sheets. Check the layout and calculations after importing. This is an Excel file, not a hosted Google Sheets copy link.
Yes. Enter your own USD or CAD prices and applicable tax treatment. The example is in USD. Changing the currency label does not convert prices or choose a tax rate.
No. These are illustrative inputs for a fictional job, used to show the document structure and arithmetic. Replace them with inspected quantities and your own selling prices.
The floor is 120 sq ft, but tile comes in boxes of 12 sq ft. The sample buys 11 boxes, which is 132 sq ft. The extra 12 sq ft is a 10% allowance chosen for this sample.
Not automatically. It's a sample choice, not a universal waste factor. Your allowance depends on your tile, your layout and your supplier, so set it for each job and show the box count on the estimate.
The sample does not specify either task. Agree who handles each before using it for your customer. Add a priced line for work you take on, or state who will handle it outside your price.
A template suits you when you already have quantities, prices and rates. If you'd rather start from the job, Construction Job Estimator lets you describe it by voice or text with your measurements, add site photos, and review local supplier prices and labor before you send a professional estimate or quote.
Yes. Open the optional browser editor below. Download or print a copy before leaving: the editor does not save entries after a refresh.
Add your job details and review the totals.
Your entries stay in this page. Download a copy before closing; refreshing clears them.