Measure the work.
Allow for the finished floor and tread build-up when setting rise.
Free stair geometry calculator
Enter the total vertical rise, your chosen maximum riser and tread going to review a straight flight.
Free to use · No signup · By Daniel
Use your own figures or try the example.
Calculated from the figures you enter.
Fill in your measurements or costs to see the result and its breakdown here.
Ready for the whole job?
Keep the scope, materials and labour together in Construction Job Estimator.
Create an estimate in the appKnow what goes into the number.
Round total rise ÷ chosen maximum riser up. Divide total rise by that whole riser count. With the upper landing acting as the last tread, horizontal run is (risers − 1) × going.
Allow for the finished floor and tread build-up when setting rise.
Round total rise ÷ chosen maximum riser up. Divide total rise by that whole riser count. With the upper landing acting as the last tread, horizontal run is (risers − 1) × going.
Geometry, not a code approval or stringer cutting plan. The entered limits are examples, not local requirements. Headroom, landings, nosings, handrails and structural support require separate review.
Worked example
105 in with a chosen 7.5 in maximum gives 14 risers at 7.5 in. Thirteen 10 in goings create a 130 in horizontal run.
Illustrative inputs. Replace them with the figures for your job.
The example breakdown
Allow for the finished floor and tread build-up when setting rise.
Uniform risers alone do not confirm the stair is suitable.
Multiple flights and intermediate landings need their own layout.
Geometry, not a code approval or stringer cutting plan. The entered limits are examples, not local requirements. Headroom, landings, nosings, handrails and structural support require separate review.
No. The worked example uses illustrative inputs. Enter current supplier quotes and your own labour and business costs.
Use the measurement units shown beside each field and keep all prices in one currency. Currency selection labels amounts; it does not convert them.
Geometry, not a code approval or stringer cutting plan. The entered limits are examples, not local requirements. Headroom, landings, nosings, handrails and structural support require separate review.
Yes. Once your inputs are complete, download a CSV or use Print / save PDF. Your copy includes the inputs and calculation limits. Refreshing this page clears your entries.