Measure separate runs.
Split the fence at corners or gates where appropriate. Enter the uninterrupted lengths separated by commas and leave gate openings out.
Free fence panel calculator
Enter your fence runs and effective bay length. Check panels, shared posts and optional gravel boards in one place.
Free to use · No signup · By Daniel
Use your own figures or try the example.
Calculated from the figures you enter.
Fill in your measurements or costs to see the result and its breakdown here.
Ready for the whole job?
Keep the scope, materials and labour together in Construction Job Estimator.
Create an estimate in the appKnow what goes into the number.
Check your panel and post system before measuring: panel face width, slot engagement and post width affect the distance between post centres. Enter that effective bay length. Each run rounds up independently, so a short last bay may require a cut panel rather than a shorter order length.
Split the fence at corners or gates where appropriate. Enter the uninterrupted lengths separated by commas and leave gate openings out.
Use the installed distance between post centres for your panel and post system. Panel face width alone may not be the right measurement.
Round each run up separately, add its end post and deduct genuinely shared posts. Choose whether to include one gravel board per bay.
Worked example
For runs of 9 m and 5.4 m with an illustrative 1.8 m effective bay length, the calculation gives five plus three panels. The two runs need ten posts before deductions, or nine when they share one corner post. If selected, eight gravel boards are counted.
Illustrative inputs. Replace them with the figures for your job.
The example breakdown
A final short bay can still require a whole panel to purchase and cut. Confirm whether the selected panel can be cut to fit.
Splitting a run around a gate retains its adjacent end posts. The gate, hardware and any different gate-post specification are separate.
Ground level changes, access and the chosen post system can affect the installation. This count does not design foundations or stepped detailing.
Gate openings must split the entered runs; gate leaves and hardware are not included. Deduct only posts that are physically shared. This quantity check does not choose post size, embedment, concrete volume, stepped-panel detailing or the correct system for the ground and exposure.
Product information to check: Jacksons fencing calculators and system planning.
Not necessarily. Post width, slots and how the panel engages with the posts can change the effective bay length. Check the selected system.
No. The result is the rounded panel count before spares. Add any extra panels you choose for damage or future repairs separately.
When selected, the calculator counts one gravel board for each bay. Verify the size and arrangement required by your actual system.
Yes. Changing measurement units converts the entered lengths. Counts and shared-post deductions remain unchanged.
Yes. Once your inputs are complete, download a CSV or use Print / save PDF. Your copy includes the inputs and calculation limits. Refreshing this page clears your entries.